This article will instruct how to register the InBody H20 device from the InBody app.


1. Open the InBody app


2. Navigate and press the settings icon

3. Select Register to begin connecting your device


 

4. Power on the H20 device 

5. Press Set and Confirm

 

6. Once the H20 device is found press Confirm to complete the registration

Start the test by pressing the Start Test button at the top or from the + Add Result(s) bottom below from the redirected page.



If for any reason the H20 device cannot be found or does not connect, try disabling the mobile device's Bluetooth, re-enabling it, and try again.